| Info: | |
| Data type: |
Description:
Response error while switching on the controller if the drive is in an error state. The green blinking ready LED indicates the 'controller not ready' state (befor V2.130: The red error LED is lit continuously). Additionally, a runtime error is entered, which provides detailed information about the cause of error. (e.g. error number 1011). This error entry can also be triggered using a separate command (CMD_ERR_STATE_INTO_FIFO).
Reaction:
The power level is not enabled and the controller is not switched on.
Cause/Remedy:
See additionally entered error numbers.