| Info: | |
| Data type: |
Description:
Runtime error if at least one of the three high-side transistors (Phase U, V, W) in the power stage registers overcurrent.
Reaction:
See error number 6019.
Cause/Remedy:
Motor wiring error:
See error number 6019.
Motor defect:
See error number 6019.
ACOPOS servo drive defect:
- Alloyed transistor or control in a half-bridge defective. -> Check if the error is also registered when the motor cable is unplugged.
Set current value jump:
See error number 9300.